Fix: Network not available on iPhone

With substantial rises in network speeds and availability, many of us rely on cellular data more and more these days. And, cellular (mobile) data be that LTE or 5G, is something you usually don’t have to worry about. As long as you have a data plan and carrier support, there’s nothing you should configure, nor adjust in order for cellular data to work. However, some iPhone users are getting the Network not available error on their devices. And, that’s a rather strange error, unless you don’t have data to use or you are out of network coverage. So, why the error appears, and how to fix it? We have a few ideas so make sure to check them out below.

Table of contents:

  1. Restart your device
  2. Enable and disable Airplane mode
  3. Disable Bluetooth
  4. Check the SIM Card
  5. Install carrier configuration file
  6. Reset Network settings
  7. Reset your iPhone to factory settings

Why is LTE not working on my iPhone?

1. Restart your device

Let’s start with the simplest of steps. Before doing anything else, power off your device, and power it on again. This usually resolves the problem. Also, make sure that you are in an area that has good network coverage.

If the issue persists, make sure to move to the next step and try with the Airplane mode.

2. Enable and disable Airplane mode

The next thing to do is to enable and disable Airplane mode. Some users managed to resolve the problem by doing so, but we can’t say with certainty whether this will or won’t work for you.

Either way, it won’t cost you to give it a try. Here’s what you need to do:

  1. On the Home Screen, swipe from the right side downwards or from the bottom to bring Control Center.
  2. Expand the Connectivity box.
  3. Tap on Airplane Mode to enable it.
  4. After a minute or so, disable Airplane Mode.

3. Disable Bluetooth

Some users pointed out that Bluetooth somehow conflicts with cellular reception. Although the reports are scarce, you can try disabling Bluetooth. Just for the sake of troubleshooting.

If disabling Bluetooth does nothing and you are still getting the Network not available prompt on your iPhone, make sure to move to the next step.

4. Check the SIM Card

This is a big one. The majority of cellular issues have something to do with either SIM settings or the actual physical placement of the SIM card. If you are using a Dual SIM option with eSIM, make sure that you’ve chosen the right SIM card to use with cellular data.

Hardware-wise, open the SIM card compartment and make sure that the SIM is properly placed and that it’s not physically damaged. Place the SIM back and restart your device once again. Now, if you are still getting the Network not available message on your iPhone, check the carrier settings, as explained in step 5.

5. Install carrier configuration file

Cellular configuration files are usually automatically sent by the carrier as soon as the SIM card is placed. These messages will, when applied, insert all necessary APN Settings. However, sometimes, for various reasons, you might miss the message and, without it, your SIM card and all related services won’t work.

So, either check the way to get the message via carrier dialer code or with a carrier app that most service providers have these days. Or, alternatively, contact your carrier and ask for a SIM configuration message. Once you get the message (or multiple messages), make sure to apply settings.

6. Reset Network settings

Now, if the issue is still present and your cellular data still won’t connect, let’s reset Network Settings. These settings cover only Wi-Fi, cellular (APN settings), and Bluetooth. So, only settings under these respective connectivity features will be affected by the reset.

Have in mind that this action will clear all saved Wi-Fi networks and Bluetooth pairings. If that’s too much of a hassle for you, you can skip to factory reset explained in the step below.

Here’s how to Reset Network Settings on your iPhone:

  1. Open Settings.
  2. Tap General.
  3. Select Reset.
  4. Tap Reset Network Settings.
  5. Enter password or PIN and then confirm the selection.

7. Reset your iPhone to factory settings

So, in the end, the only remaining step we can think of is to reset your device to factory settings and restore it from an iCloud backup. This can take some time but it’s the last thing you can do on your own before either taking your device for the repair or contacting your carrier and reporting the problem.

You can either use iTunes on your Mac or PC or go straight to iPhone settings. The latter is explained below.

  1. Go to Settings.
  2. Select General.
  3. Tap Reset.
  4. Tap Erase All Content and Settings. Make sure to back up everything to iCloud. Navigate to Settings > Your Account at the top > iCloud > iCloud Backup and tap Back up Now.
  5. Enter PIN/Password when prompted and confirm.
  6. Once your device reboots, choose Restore from iCloud Backup.

That should do it. Thank you for reading, check our Facebook and Twitter pages, and feel free to share your thoughts, questions, or suggestions in the comments section below.

Get to know your phone!

If you just learned something new about your phone, and want more of that, subscribe to our newsletter.

We guarantee 100% privacy. Your name/email address will never be shared.

Notify of
Inline Feedbacks
View all comments